Parasound AVC-2500 User Manual download pdf (Page 45)

Setup Menu Level Five - On-Screen Display Setup Procedures

This setup feature gives you the option of having an on-screen information display for any

of the video outputs. You can turn on or off the on-screen display at the Composite Video, S-

Video, or Component Video outputs. You can also program the display default system to be

for the NTSC or PAL video format. PAL is the video format in most European countries and

NTSC is the predominant video format in other regions.

To Assign the On-screen Display for Composite Video, S-Video, and

Component Video Outputs:

1. Press and hold the Setup/Trim button on the remote control until SOURCE SETUP appears

on the front panel or on-screen display.

2. Press the Setup/Trim button until OSD SETUP and COMPOSITE OSD and YES: appears in

the displays.

3. Press the Volume

g g

g or

h buttons to select YES if you want on-screen display, or NO if

you do not want the on-screen display through the composite video outputs.

4. Press the Tune

f f

f or

e buttons to select S-VIDEO. Repeat step 3

5. Press the Tune

f f

f or

e buttons to select COMPONENT VIDEO. Repeat step 3

6. Press the Tune

f f

f or

e buttons to select DEFAULT SYSTEM.

7. Press the Volume

g g

g or

h buttons to select NTSC or PAL. If you select the incorrect

format, the on-screen display will become unstable and roll vertically up the screen.

8. Press the Setup/Trim button to advance to DC TRIGGER SETUP, or press and hold the

Setup/Trim button for three seconds to exit OSD SETUP and return to normal operation.

Setup Menu Level Six - DC Trigger Assignment Procedures

You can program the external Main (or 1) and/or the Zone (or 2) +12 V DC Triggers on the

rear panel to activate when any of several “events” occur during operation. The variety of

triggering events offer virtually unlimited automation options. If you select Polarity Invert,

it does not mean that the +/- are reversed at its jack. Instead, Polarity Invert means that the

activation rule is reversed. This means that trigger output is normally active and it only turns

off when the event is selected. For example, you could set the DC trigger to turn on the

lights in your home theater whenever you turn the AVC-2500 off by changing the polarity

for the POWER event from NORM to INV. You can also set the delay time of either trigger from

no delay (0 s) to a maximum delay of ninety seconds (90 s).

To Program DC Trigger Outputs in Response to a Preset Event

1. Press and hold the Setup/Trim button on the remote control until SOURCE SETUP appears

on the front panel or on-screen display.

2. Press the Setup/Trim button until DC TRIGGER, MAIN SOURCE and POWER: appear in the

displays.

3. Press the Volume

g g

g or

h buttons to select the event to activate the DC trigger. See event

choices below.

4. Press the Tune

f f

f or

e buttons until MAIN POLARITY: NORM appears in the displays.

5. Press the Volume

g g

g or

h buttons to select NORM OR INV POLARITY.

6. Press the Tune

e button to select MAIN DELAY: 2 S.

7. Press the Volume

g g

g or

h buttons to set the trigger delay time up to 90 seconds.

8. Press the Setup/Trim button to advance to SYSTEM SETUP, or press and hold the Setup/

Trim button for three seconds to return to normal operation.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 62 63

Comments to this Manuals

No comments

Parasound AVC-2500 User Manual Page 45

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Parasound AVC-2500